Our solutions

Metal O-rings. Extreme conditions.
Metal C-rings. High requirements.
PTFE Seals. Newest generation.

With our experience we can make every required seal for the highest conditions. Contact us for your specific needs.

Contact us for more information

Eurosealings NV
Molenberglei 17
2627 Schelle

tel: 03 844 11 16
fax: 03 844 42 81

Sealing specification

Performances and types
Selection criterions for metal O-rings

Coating and quality of finish

Sealing specification

Sealing load or required force of pressure

The following graphic chart shows the required force of pressure referring to the diameter of the sealing ring for different tube outside diameters and wall thick-nesses of the stainless tubing. For tubing made of Inconel 600 the indicated values have or be multiplied with factor 1.1 and for Inconel X-750 with factor 1.4.

(Click for big picture)

Sealing specification - order code key

(Click for big picture)

The order example describes above "MOR-332-096,80-PFS1" refers to a metal O-ring of:
Inox 321, with tube outside diameter of 2.4 mm, a wall thickness of 0.25 mm, a ring outside diameter of 96.80 mm, pressure-filled, silver coated with a coating thickness from 0.03 to 0.05 mm

Should you require any further instructions or recommendations, please supply us the following information:
application, ranges of temperature and pressure, available space, material, medium to be sealed, available force of pressure, drawing of the installation position.

Our competent and experienced team will always assist you consultative.